Cushion Mount Plus Plate Mounting Tape - 3M E1915

• Mount flexographic print plates to print cylinders
• Get high quality light-medium combination print
• Remove cleanly from print plates and print cylinders
• Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
• Easy Mount liner, has micro-channels in both adhesive surfaces. The crosshatched pattern allows air to escape from between the tape and cylinder/sleeve and between the tape and plate. The productivity is increased, total handling time is reduced and printing defects are eliminated

Mount your photopolymer plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1915. Our 0.38 mm pink, double coated foam tape has the air release feature with easy plate side removal. It is used for high speed when process and halftone images predominate.

Place and remove flexographic print plates from print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1915. Our pink, double coated mounting tape has an air release feature adhesive with easy plate side removal. It provides high quality light-medium combination print and is suitable for printing combination of solids and tone reproduction where process printing is important. After printing, the adhesive removes cleanly from the print plate and print cylinder.